Wood Veneer Dryer Machinery

Wood Veneer Dryer Machinery

The wood veneer dryer machinery is mainly used for the drying of veneers. It is an economical method to reduce the moisture content of the veneer to minimize the loss of the plate and meet the veneer requirements of the drying veneer process. This environmental veneer dryer effectively solves difficult issues such as hard to dry, long drying cycle, uneven drying, easy to crack, deformation and low yield, and other problems during the drying process. Compared to other types of veneer dryers, the best advantage of the waste wood veneer drying machine is that the fuel cost is low and can make full use of the waste wood of the peeling machine, which can also save space for the users.

Roller veneer drying machine has an advanced heat exchanging structure with features of high heat exchange efficiency and low heat loss. The core veneer dryer can be heated by a steam boiler, thermal oil heater, or biomass burner which can save fuel costs the most. The composite drying cost using biomass burner heated roller dryer is about only USD 12 per cubic meter including the labor cost, fuel cost, and electricity.  

Advantages of Wood Veneer Dryer Machinery

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying. 

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .

3.Shine core veneer dryer  or face veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.

5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.

6. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.

Product Parameters of Wood Veneer Dryer Machinery

Certification

Customer Case

Our Services

Pre-sale services:

1) Provide the free consultation of all plywood veneer dryer

2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.

3) Welcome to visit our factory

Services during the sales:

1) Inspect the machine before leaving the factory.

2) Oversea install and debug the equipment

3) Train the first-line operator.

After sale services:

1) 24 hours online service

2) Provide the VIDEO with Install and debug the equipment

3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible

Packaging & Shipping