2-Deck Wood Dryer Machine
(1)The biomass burner is Shine’s patented product which can directly burn all kinds of waste wood and has the features of high productivity、energy efficiency、fuel saving and so on.Compared with steam burner and thermal oil burner,it can lower drying cost greatly.
(2)The unique air duct design, appropriate roller diameter, and roller spacing ensure that the moisture content of the dried veneer is uniform, flat, without wrinkles and end ripples.
(3)Low maintenance is required for Shine veneer dryer and no veneer jamming can reduce downtime.
Product Details
Product Introduction of 2-Deck 28-meter Wide Roller Veneer Dryer
The 2-Deck 28-meter dryer has the features of high efficiency, low drying costs, and excellent drying effect.
The Machine is segmented into four-meter sections, each equipped with a 4KW axial flow fan. Despite the machine's total power being only 77 kilowatts, it can dry 35-40 cubic meters of veneer each day. This highlights its low energy consumption and high production efficiency.
The dryer also utilizes a 4-ton biomass burner that can directly burn waste wood and bark from the peeling process, reducing fuel costs and preventing the accumulation of waste materials.
Product Parameter of Wood Dryer Machine
Model No | GTH30-28 |
Working Width | 3m |
Deck | 2 |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃ adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | About 35-40m³/day |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（7pc） |
Traction motor | Power: 5.5KW，frequency control（2pc） |
Cold air blower | Power:5.5KW（1pc） |
Air intake fan | Power: 11KW（1pc） |
4ton biomass burner | Power: 16.5KW |
Total power | 77KW
|
Actual electricity consumption | About 50kwh per hour |
Our service
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close