2-Deck 30-Meter Roller Veneer Dryer
（1）The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
（2）Automatic electrical control system has the advantages of saving labor cost、simple operation and low failure rate whose main electrical components are international famous brand.
（3）Shine veneer dryer adopt inverter control which can adjust transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve drying effect.
Product Details
Product Introduction of 2-30 m Wood Veneer Dryer Machine
2-Deck 30 m Wood Veneer Dryer adopts customized services to ensure maximum production within limited space.
Under normal circumstances, our roller dryer usually has a 4-meter cooling zone to ensure that the veneer will be not too hot to touch after drying. However, considering the limited space in the customer's factory, we have adopted a configuration of a 28 meter heating area and a 2 meter cooling area. The customized dryer can dry approximately 47 cubic meters of veneer in 24 hours. On the premise of ensuring reasonable utilization of factory space, it not only ensures production but also ensures that the temperature of the veneer after drying will not be too hot.
Product Parameters of 40 m Wood Veneer Dryer Machine
Model No | GTH30-30 |
Working Width | 3.0m |
Deck | 2 |
Heating area length | 28m |
Cooling area length | 2m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 47 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 5.5KW（7pc） |
Traction motor | Power: 5.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power: 11KW（1pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 82.5KW |
Actual electricity consumption | About 54kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment
7.Provide technical exchanging
8.Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close