The Advantages of Choosing Shine Veneer Dryer

1. The biomass burner independently developed by our company is our patented product. It can use the black skin, white skin, saw head and other waste wood produced by the veneer rotary cutting as fuel, which realizes the use of local materials and turns waste into treasure. . It greatly reduces the energy cost in the veneer drying process, and is a truly energy-saving and environmentally friendly dryer heating device. It can directly burn all kinds of waste wood, and has the main characteristics of environmental protection, high efficiency and fuel saving. Compared with steam or heat conduction oil furnace dryer, the drying cost is greatly reduced.

2. The automatic board feeding, splitting system and automatic board closing system are the first automatic board feeding and unloading systems for veneer dryers in China. Only 1-2 people are required at both ends of the dryer, which solves the problem of manual feeding. The problem of large number of board personnel and high labor intensity.

3. The carefully developed heat exchange system fully improves the utilization rate of energy and saves unnecessary energy waste. It has obtained the national invention patent and adopts step-by-step heat exchange. The specifications of the heat exchangers in each section are different. The hot air can be evenly distributed to the veneer; ensure the uniform drying of the veneer.

4. The temperature in the oven is 40-60 degrees Celsius higher than that of the traditional dryer (steam, heat transfer oil), which shortens the total drying time of the veneer, thereby greatly improving the drying output. The control cabinet has built-in automatic temperature control and speed regulation system, which can precisely control the final moisture content. Simple operation and low failure rate.

5. After drying, the moisture content of the veneer is uniform, flat, without wrinkles and cracks, and the surface is in a good state of gluing. After drying, it is not easy to deform, the damage rate is low, and the yield is high; it will not be affected by the weather. According to actual calculations, the comprehensive drying cost of drying one side of the veneer is about 80 yuan, including labor, electricity and fuel costs.

6. The bearing is resistant to high temperature of 500 degrees and low temperature of minus 20 degrees, and is free of refueling and maintenance for life; it is made of φ102 special steel pipe material. The bearings installed in the dryer are high temperature resistant and maintenance-free bearings from minus 20 degrees Celsius to minus 500 degrees Celsius. There is no need for oil filling in daily operation, which is convenient for maintenance.