Veneer Drying Machinery
Roller veneer drying is a new generation wood veneer drying machine. It adopts the latest international pressure contact veneer drying technology to ensure the veneer is heated evenly. It can be used to dry rubber wood, eucalyptus, birch, teak, all kinds of hard wood and soft wood veneer etc.
Veneer thickness（mm）: 0.6-8
Work width（m): 3
Veneer Water Moisture: Down to 10%
Product Details
Veneer Drying Machinery
Wood veneer drying machinery has the merits of high productivity, energy efficiency, lowest drying cost and perfect drying effect. Face veneer dryer uses waste wood fired air heater without thermic oil or steam boiler. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness. Biomass veneer dryers machine is our patent, which can burn all kinds of waste wood direclty to reduce fuel cost mostly. We can design different models veneer drying line to meet users requirement.
Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
Advantages of Roller Veneer Dryer
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
4.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
5. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.
viedo in customer scene
veneer dryer video of Russia customer factory
Product Parameters
Parameter Model |
DHS20M
| DHS22M | DHS24M | DHS26M | DHS28M | DHS30M |
Work width（m） | 3 | 3 | 3 | 3 | 3 | 3 |
Deck | 4 | 4 | 4 | 4 | 4 | 4 |
Veneer thickness（mm） | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 |
Heating area （m）
| 16 | 18 | 20 | 22 | 24 | 26 |
Cooling area (m) | 4 | 4 | 4 | 4 | 4 | 4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | About 3 | About 3.3 | About 3.6 | About 4 | About 4.4 | About 4.8 |
Heat exhaustion（10000 kcal/h） | About 105 | About115 | About126 | About140 | About 154 | About168 |
Total power (kw) about | 105 | 110 | 115 | 120 | 125 | 130 |
Overall size LxW（m） | 31*5.5 | 33*5.5 | 35*5.5 | 37*5.5 | 39*5.5 | 41.*5.5 |
Customer Case
Customers from Brazil Visit
Certificate
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Product Packaging And Transportation
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close