2-Deck Roller Veneer Dryer with 3.75-Meter Working Width
(1)The can directly burn all kinds of waste wood and has the features of high productivity、energy efficiency、fuel saving and so on.Compared with steam burner and thermal oil burner,it can lower drying cost greatly.
(2)The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
(3)We have perfect after-sale system which can provide 24-hour online service and remote operation is available on request.Besides,we also visit customers regularly and Provide sufficient spare parts supply in time.
Product Details
Product Introduction of 2-Deck 56-Meter Roller Veneer Dryer
2-Deck 56-Meter Roller Veneer Dryer features an impressive working width of 3.75 meters, complemented by a powerful 10-ton biomass burner,Fully ensuring its daily output.
The customized working width of 3.75 meters increases the hourly drying output, allowing it to dry 4-5 cubic meters of veneer per hour.The customized working width of 3.75 meters increases the hourly drying output, allowing it to dry 4-5 cubic meters of veneer per hour.
Product Parameters of 40 m Wood Veneer Dryer Machine
Model No | GTH375-56 |
Working Width | 3.75m |
Deck | 2 |
Heating area length | 52m |
Cooling area length | 4m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 110.5 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 5.5KW（13pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（2pc） |
Air intake fan | Power:15 KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 144 KW |
Actual electricity consumption | About 94kwh per hour |
Customer Case
Zimbabwe Customer South Africa Customer
Our Service
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Certificate
Our Transportation
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close