Veneer Roller Dryer Manufacturers
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 32m
Drying capacity (m³/day) : ·110-120
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Product Details
Veneer roller dryer
This is roller type veneer dryer,Plywood veneer drying Machine is an important part of plywood production process. The roller dryer machine can be divided into two parts: heating section and cooling section.The heat medium can be oil and heat steam.This veneer dryer machine is very efficient and productive,its drying capacity is 110-120m³/ day 24 hours of 36m veneer dryer. As the veneer is pressed by solid hot platens when working, so veneer will very flat after dry, and the veneer spoil rate is very low.
Our biomass burner can use waste wood as fuel and the burning rate can be more than 95%.and also there is no any smoke,which is environment friendly.Shine roller veneer drying machines have been exported to more than 20 countries such as Latvia, Indonesia, Vietnam, Thailand, Laos, Malaysia, Cambodia, Myanmar, Brazil, Bolivia, South Africa, South America, Ethiopia, The Republic of Congo and etc.
The hot air fan and the cold air fan of the dryer use the latest axial flow fan, which reduces the power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operation cost.
Features:
1. This model is a straight-through horizontal circulation roller veneer dryer. Its thermal cycle design draws on the advantages of advanced European dryer technology, and adopts an upright centrifugal fan with a volute (flow rate of 45,000 to 62,000 m3/ h).
2. The new type of heat exchanger and the rectangular variable-section spray box make the high-speed jet airflow acting on the surface of the veneer uniform. The hot air blowers in the heating chambers in the front and rear areas are arranged separately from left to right, so as to ensure that the dried veneer obtains a consistent final moisture content at each point.
3.In order to adapt to the humid tropical climate, the length of the cooling open section is appropriately lengthened to facilitate the cooling of the dried veneer and reduce the phenomenon of damp return.
Product Parameters of Roller Veneer Dryer
Model No | GTH30-36 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 0-15% |
Heating material & drying temperature | Waste wood, 140-180°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 5 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 8KW（16pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10ton biomass burner | Power: 16.5KW |
Total power | 212.5KW |
Actual electricity consumption | About 170kwh per hour |
Certification
Project Case
Our Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Packaging & Shipping
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close