Plywood wood veneer Dryer Feeder
Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
Price
$170,000.00
Product Details
Plywood wood veneer Dryer Feeder
Shine 4 deck veneer dryer is our newly developed product to meet high capacity requirements of customers,which has the salient features of higher drying capacity.The rollers use φ102 steel special shaft tube.The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance which no need injecting oil and easy maintenance in the daily operation.A unique heat exchange structure makes the equipment run efficiently and greatly improves drying output. Biomass burner is our patented product, which can burn waste wood (rotary cutting veneer, waste bark, and waste veneer) directly, heat air, and deliver to the dryer directly without heat loss. The fuel cost is much lower than thermal oil, steam gas, electricity, and others. The composite cost is only about $10/m³.Our biomass burner can pass the inspection and acceptance of the environmental protection department.
Advantages of Veneer Drying Machine
1.The veneer after drying has uniform moisture content and it is flat without buckle or end waviness.
2.The veneer after drying is free of splits and the surface is in good condition for gluing.
3.Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.
4.Shine veneer dryer is equipped with automatic control system with merits of saving labor cost, easy operation and low failure rate. Main electrical components are international famous brands.
5.Shine veneer dryer adopts frequency conversion, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve an ideal drying effect.
Product Parameters
Parameter Model |
DHS20M
| DHS22M | DHS24M | DHS26M | DHS28M | DHS30M |
Work width（m） | 3 | 3 | 3 | 3 | 3 | 3 |
Deck | 4 | 4 | 4 | 4 | 4 | 4 |
Veneer thickness（mm） | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 | 0.6-8 |
Heating area （m）
| 16 | 18 | 20 | 22 | 24 | 26 |
Cooling area (m) | 4 | 4 | 4 | 4 | 4 | 4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | About 3 | About 3.3 | About 3.6 | About 4 | About 4.4 | About 4.8 |
Heat exhaustion（10000 kcal/h） | About 105 | About115 | About126 | About140 | About 154 | About168 |
Total power (kw) about | 105 | 110 | 115 | 120 | 125 | 130 |
Overall size LxW（m） | 31*5.5 | 33*5.5 | 35*5.5 | 37*5.5 | 39*5.5 | 41.*5.5 |
The Customer Evaluation
Certificate And Exhibition
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close