Plywood Roller Veneer Dryer For Sale
Roller veneer drying machine has an advanced heat exchanging structure with features of high heat exchange efficiency and low heat loss. The core veneer dryer can be heated by a steam boiler, thermal oil heater, or biomass burner which can save the fuel cost the most. Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
Product Details
Plywood Roller Veneer Dryer For Sale
Plywood roller veneer dryer is a new generation wood veneer drying machine. By adopting latest international pressure contact veneer drying technology, Shine roller veneer dryer has the advantage of high veneer drying capacity, lowest operate cost, energy efficiency and high quality dried veneer. The veneer after drying has the uniform moisture content, flat, no waviness and shrinkage is kept to a minimum. The surface is in good condition for gluing for plywood process.
The hot air fan and the cold air fan of the dryer use the latest axial flow fan, which reduces the power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operation cost.
Shine plywood roller veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
The well-developed heat exchange system fully improves the utilization rate of energy, saves unnecessary energy waste, and has obtained the national invention patent.
Product Parameters of Plywood Roller Veneer Dryer
Model No | GTH45-40 |
Working Width | 4.5m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 168-192 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW×2（18pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 228.5KW |
Actual electricity consumption | About 189.2kwh per hour |
Overall Dimension(L*W*H) | 51m×13m×3.5m |
Our Factory
Certification
Customer Visiting
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood machinery
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close