New Veneer Drying Machine in South Africa
（1）Low maintenance is required for Shine veneer dryer and no veneer jamming can reduce downtime.
（2）We have professional R&D team which can design different models as customers’ requirement.
（3）The veneer after drying is free of splits and in good condition for gluing.
Product Details
Product Introduction of 4-Deck 50-Meter Veneer Drying Machine
The 4-Deck 50-Meter Wood Drying Machine has been installed and operating in South which working width is 4.5 meters customized as custom's requirements.
The customized working width also increases its output of drying veneers.It can dry approximately 10 cubic meters of veneer per hour, which is 3-3.5 cubic meters more than a drying machine with a working width of 3 meters per hour.
Roller Veneer Dryer in South Africa
Semi-Automatic Board Collection
Technical Parameters of 4-DecK 50-Meter Veneer Dryer Machine
Model No | GTH45-50 |
Working Width | 4.5m |
Deck | 4 |
Heating area length | 46m |
Cooling area length | 4m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 10 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（46pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 276.5KW |
Actual electricity consumption | About 180 kwh per hour |
Certificates
Transprotation
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close