Economical Vertical Veneer Dryer
(1)Small footprint, with a length of about 20 meters and a width of about 7 meters, reduces investment in factory construction and saves factory space.
(2)Adopting a reciprocating design, the heat energy is effectively utilized, and it can dry about 1.5 cubic meters per hour with high drying efficiency.
(3)Equipped with a temperature controller, it can control the temperature within 110-140 degrees Celsius, ensuring safe production while ensuring production efficiency.
Product Details
Product Introduction of Vertical Veneer Dryer
The vertical veneer dryer can directly burn wet tree stems, reducing your drying costs. Equipped with independent flue and heat exchanger, it can avoid single board contamination by smoke during the drying process.
Product Parameters of Vertical Veneer Dryer
Model | FBH30-20 |
Moisture Content（%） | Fresh veneer to within 20% |
Capacity(m³/H) | 1.2-1.5 |
Overall Size | 20 X 7 X 4 |
Hot Air Blower（KW） | 1.5kw X 6set=9KW |
Traction Motor（KW） | 4KW |
Intake Air Blower（KW） | 7.5KW |
Internal Burner Blower （KW） | 1.1KW |
Oil Station Power | 2.2KW |
Water Pump Power
| 2.2KW |
Chain Conveyor | 2.2KW |
Infeed Conveyor Belt
| 2.2KW |
Side Entry Feeding
| 2.2KW |
Veneer Collecting | 2.2KW |
Cooling Blower (Above burner) | 0.75kw*2set=1.5KW |
Total Power（KW） | 36.3KW |
Weight (Ton) | Around 15 |
Container | 1*40’HQ |
Fuel Consumption（KG/H） | 150 |
Labor（workers） | 3(The burner operator can also work concurrently with other tasks such as operating a forklift) |
Certificate
Transportation
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close