4-Deck Highly Automated Roller Veneer Dryer
(1)The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
(2)Automatic electrical control system has the advantages of saving labor cost、simple operation and low failure rate whose main electrical components are international famous brand.
(3)Shine veneer dryer adopt inverter control which can adjust transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve drying effect.
Product Details
Product Introduction of 4Deck 40m Wood Veneer Dryer Machine
Many friends who produce veneers are suppliers of well-known furniture factories such as IKEA. This requires the veneer to have excellent flatness and uniform moisture content. As an IKEA supplier, Romanian customer visited multiple dryer manufacturers and after visiting our Latvian operation site, the customer ultimately refused a complete solution from other manufacturers from rotary cutting to drying and chose our dryer.The dryer is 4-Deck 40meters and its working width is 3.5meters,which can dry140-150 cubic meters in 24 hours.
Product Parameters of 40 m Wood Veneer Dryer Machine
Model No | GTH35-40 |
Working Width | 3.5m |
Deck | 4 |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 140-150m³ |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（36pc） |
Traction motor | Power: 15KW，7.5frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
Total power | 212 KW |
Actual electricity consumption | About 150kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close