2-Deck Customized Roller Veneer Dryer
(1)Shine Roller Veneer Dryer has the features of high productivity、energy efficiency、lowest drying cost and perfect drying effect.
(2)Automatic electrical control system has the advantages of saving labor cost、simple operation and low failure rate whose main electrical components are international famous brand.
(3)We have perfect after-sale system which can provide 24-hour online service and remote operation is available on request.Besides,we also visit customers regularly and Provide sufficient spare parts supply in time.
Product Details
Product Introduction of 2-Deck 56m Wood Veneer Dryer Machine
This 2-Deck 56 meter dryer adopts customized services. We have widened the working width of the dryer according to the customer's needs. The single feeding plate has been increased from 4 to 5, and the 24-hour production capacity is around 110-120 cubic meters. We have achieved a balance in budget and production, and have gained the customer's recognition.
Product Parameters of 36 m Wood Veneer Dryer Machine
Model No | GTH375-56 |
Working Width | 3.75m |
Deck | 2 |
Heating area length | 52m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | Around 100-110 m³ |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 5.5KW（13pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 138.5KW |
Actual electricity consumption | About 100 kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close