< >

2-Deck Customized Roller Veneer Drying Machine

(1)Low drying cost.The 4 T Biomass Burner can directly burn all kinds of waste wood and wood barks which lower drying cost.

(2)High efficiency.A Veneer only takes 7-8 minutes from entering the dryer to fully drying that greatly improve the drying efficiency.

(3)Uniform moisture content.The air duct, appropriate roller diameter and roller spacing ensure that the hot air can be evenly distributed to each veneer which makes the veneer after drying has moisture content.

(4)We have professional R&D team which can design different models as customers’requirement.The air ducts, radiators, and moisture removal systems are all our patented products, which are the result of our persistent research and development.

Contact Now

Product Details

Product Introduction of 2-Deck Roller Veneer Dryer

2-Deck Roller Veneer Dryer is one of the most important machines in the plywood making process.Compared to veneer dryed by sunlight,veneer drying by dyer has the advantages in productivity、mositure content and flatness.

Roller Veneer Dryer.jpg

Our Roller Veneer has the feature of high productivity.Compared to natural drying, our dryer is not affected by weather and can operate 24 hours a day.What's more,the maximum output of the double-layer dryer can reach 120-130 cubic meters per day.The biomass burner provides sufficient heat for veneer drying, and the heat exchanger converts the flue gas into clean hot air, which is evenly distributed to the surface of the veneer through the air duct.Appropriate roller diameter and roller distance can not only ensure that the veneer is fully exposed to the hot air, but also ensure that the dried veneer is smooth and wrinkle-free.

Roller Veneer Dryer.jpg

Product Parameter of Wood Drying Equipment

Deck	2
Roller material	Q235B, φ102 special shaft tube
Heating area length	28m
Cooling area length	2m
Veneer thickness and size	0.6-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	47.6
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 5.5KW（7pc）
Traction motor	Power: 5.5KW，frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power: 11KW（2pc）
4 ton biomass burner	Power: 16.5KW
Total power	93.5KW
Actual electricity consumption	About 61kwh per hour