< >

2-Deck 56m Roller Veneer Dryer

(1)The biomass Burner can directly burn wet wood bark, which can obtains materials locally, save factory space, and reduce drying costs.

(2)Equipped with temperature controller.After setting the moisture content, the roller drive speed can be automatically adjusted according to the temperature inside the dryer.

(3)After drying, the moisture content of the veneer is uniform, without wrinkles and end ripples. Reasonable roller spacing and air duct design ensure that the dried veneer will not crack in the width direction.

Contact Now

Product Details

Product Introduction of 2Deck-3.75m Roller Veneer Dryer

One of the advantages of our equipment is that we can provide customized services according to customer needs. The standard width of our roller dryer is 3 meters. However, due to production and economic considerations, we have recommended a working width of 3.75 meters to the customer. Configure our independently developed biomass combustion furnace to easily dry approximately 110 cubic meters of veneer within 24 hours.

Roller Veneer Dryer.jpg

Product Parameters of 56 m Wood Veneer Dryer Machine

Model No	GTH375-56
Working Width	3.75m
Deck	4
Heating area length	52m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	Around 110 m³
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 5.5KW（13pc）
Traction motor	Power: KW，7.5frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power: 15KW（2pc）
10 ton biomass burner	Power: 16.5KW
Total power	138.5 KW
Actual electricity consumption	About 80kwh per hour