Veneer Making Machine
veneer dryer can keep the veneer smooth after drying.veneer dryer machine equipped with water circulation system, which can save energy and improve efficiency. Biomass burner as heat for 40m 2 deck veneer drying machine, bark and other tree waste can be used as the fuels for veneer drying line, saving fuel cost significantly. The drying capacity of 40m 2 deck dryer can achieve 2.5m³ per hour. The composite cost of Shine biomass veneer drying machine is only USD 6-12/per cubic meter.
Product Details
Veneer dryer is ideal for drying wood veneers and veneer drying machine is one of the main equipments in plate production. By adopting latest international pressure contact veneer drying technology. The hot air fan and the cold air fan of the dryer use the latest axial flow fan, which reduces the power consumption and greatly reduces the power of the whole machine, which can further reduce the user's later operation cost.
Humidity Removal System
The Veneer Dryer Humidity Removal System is installed on the top of the Shine’s veneer dryer to quickly and discharge the moisture inside the dryer to the outside of the workshop, avoiding the pre-condensation of steam caused by the temperature difference between the inside and outside of the dryer, and keeping the inside of the dryer dry and pressure balanced.Specially designed for users in northern cold regions. It can be installed on any dryer model of our company separately.
The thermal insulation system is specially designed for cold regions such as Russia, and the thermal insulation system of the fan is added.
Automatic Electric Control and Frequency Conversion System
Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect.
Product Parameters of Veneer Making Machine
Model No | GTH30-40 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（9pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power:5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 108.5KW |
Actual electricity consumption | About 76kwh per hour |
Covered Space of the whole machine | 46M X 9M X 3M |
Case Video of Veneer Making Machine
Certificate
Project Case
Exhibition
Our Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood machinery
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close