New Generation Hot Air Roller Drying Machine
Roller veneer drying machine has a complicated heat-changing shape with functions of high warmth exchange performance and occasional warmth loss. the core veneer dryer may be heated via a steam boiler, thermal oil heater, or biomass burner which may change the gasoline price the most. shine veneer dryer adopts an automatic electric-powered manage and frequency conversion gadget, that may adjust the transmission velocity and temperature robotically in step with distinctive veneer thickness and moisture content material to acquire and best drying effect. prepared with an automated veneer feeder and automatic series gadget, which no longer only improves the drying performance but additionally saves hard work price in most cases.
Product Details
Product Parameters of Plywood Roller Veneer Dryer
Plywood curler veneer dryer is a brand new generation wooden veneer drying system. By adopting modern global pressure touch veneer drying generation, Shine Roller veneer dryer has the benefit of excessive veneer drying capability, lowest function value, strength efficiency, and high-quality dried veneer. the veneer after drying has a uniform moisture content, is flat, has no waviness, and shrinkage is stored to a minimum. the floor is in proper condition for gluing for the plywood method. the new air fan and the cold air fan of the dryer use the contemporary axial flow fan, which reduces the strength intake and greatly reduces the electricity of the complete machine, which can further reduce the person's later operation price.
Model No | GTH45-40 |
Working Width | 4.5m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 168-192 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW×2（18pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 228.5KW |
Actual electricity consumption | About 189.2kwh per hour |
Overall Dimension(L*W*H) | 51m×13m×3.5m |
Our Factory
Certification
Customer Visiting
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood machinery
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close