4-Deck 52m Semi-Auto Veneer Feeding Roller Veneer Dryer
（1）The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
（2）The veneer after drying is free of splits/cracks and in good condition for gluing/bonding.
（3）We have professional R&D team which can design different models as customers’ requirement.
Product Details
Product Introduction of 2-Deck 52 m Wood Veneer Dryer Machine
2-Deck 52m Wood Veneer Dryer Machine adopts a semi-automatic plate loading system, and its main body length of 52 meters ensures that it has higher drying effect and better drying efficiency.
15 ton Biomass Burner can provide 9 million calories of heat per hour, and with a unique air duct design, it can control the moisture content of the veneer at around 10%, and the moisture content is relatively uniform. A length of 52 meters can dry about 80 cubic meters of veneer per day. Such a large output also requires more labor, and the semi-automatic loading system reduces the number of workers in the loading area from 4 to 2, greatly reducing labor costs.
Product Parameters of 52 m Wood Veneer Dryer Machine
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 2 |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 81.6 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 5.5KW（12pc） |
Traction motor | Power: KW，7.5frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power: 15KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 133KW |
Actual electricity consumption | About 87kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close