4-Deck 50m Roller Veneer Dryer in South Africa
(1)The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
(2)The veneer after drying is free of splits/cracks and in good condition for gluing/bonding.
(3)Shrinkage and casehardening are kept to a minimum, what’s more, collapse and honeycomb are avoided.
Product Details
Product Introduction of 4-Deck 50m Wood Veneer Dryer Machine
4-Deck 50m Wood Veneer Dryer has been installed in South Africa in 2023 and is operating well now.Considering that our customers are using it in Africa, we have adopted a series of customized services.
First of or,Considering the high temperatures in Africa, we will increase the cooling zone from 4 meters to 6 meters which ensures the veneer is not too hot to touch.Secondly,we widen the working width from 3m to 4.5m which make the machine dry about 230 cbm's veneer Perday.We adopt 4KW axial air fan which greatly decrease the total power of machine that has good adaptability in the African region.
Product Parameters of 50 m Wood Veneer Dryer Machine
Model No | GTH45-50 |
Working Width | 4.5m |
Deck | 4 |
Heating area length | 44m |
Cooling area length | 6m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | Around 230 m³ |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（44pc） |
Traction motor | Power: KW，7.5frequency control（4pc） |
Cold air blower | Power: 4KW（6pc） |
Air intake fan | Power: 15KW（2pc） |
15 ton biomass burner | Power: 16.5KW |
Total power | 276.5KW |
Actual electricity consumption | About 190kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close