4-Deck 36m Roller Veneer Dryer
The drying cost is low as the biomass burner can directly burn wet bark, reducing the fuel cost; a 4KW axial fan is used, reducing the overall power consumption by more than 35%.
The biomass burner features a double-layer design, with the outer layer surrounded by water. On one hand, it can maintain the furnace body; on the other hand, it serves to cool down the main body of the dryer when the temperature gets too high.
Product Details
Product Introduction of 4-Deck 36m Wood Veneer Dryer Machine
The true test of quality comes from genuine customer feedback. This 4-tier, 36m veneer dryer is the second set of equipment purchased by our Latvian customer. While ensuring output, we have reduced the overall power consumption by more than 35%, making it more energy-efficient. At the same time, the working width has been upgraded from 3 meters to 3.5 meters, allowing it to dry two 1.5m wide veneers simultaneously. The repeat purchase by our Latvian customer not only proves the high performance of our equipment but also deepens our cooperative relationship with the customer.
Product Parameters of 40 m Wood Veneer Dryer Machine
Model No | GTH35-36 |
Working Width | 3.5m |
Deck | 4 |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | Around 130 m³ |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（32pc） |
Traction motor | Power: KW，5.5frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 204.5 KW |
Actual electricity consumption | About 140kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close