< >

2-Deck 42m Roller Veneer Dryer

Equipped with a temperature control system, if the specified temperature is exceeded, the waste wood automatic feeding machine will slow down or stop feeding until the temperature is within the normal range. Ensuring the requirements of flatness and moisture content while ensuring safe production.

Adopting a 5.5kW fan motor, the overall power of the machine has decreased by more than 35%, ensuring production while reducing drying costs.

Contact Now

Product Details

Product Introduction of 2-Deck 42m Wood Veneer Dryer Machine

2-Deck 42m Roller veneer Dryer is the new order we have made with the customer recently that use the machine in Vietnam drying eucalyptus veneer.Equipped with 6T Biomass Burner,it can dry 60cbm encalyptus veneer in 24 hours.

At the same time, we provided customized services to the client. Combined with client's budget and after feasibility analysis, we finally recommended 2-meter cooling area to the client.

Veneer Drying Machine.jpg

Product Parameters of 2-Deck 42m Wood Veneer Dryer Machine

Model No	GTH30-42
Working Width	3.0m
Deck	2
Heating area length	40m
Cooling area length	2m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	Around 60 m³
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 5.5KW（10pc）
Traction motor	Power: KW，5.5frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power: 11KW（2pc）
6 ton biomass burner	Power: 16.5KW
Total power	110KW
Actual electricity consumption	About 72kwh per hour