< >

2-Deck 36m Roller Veneer Dryer

(1)Customized Service.We can customize the working width, number of fans, and length of the cold air area according to customer needs to meet their personalized needs.

(2)Reasonable roller spacing and inverted trapezoidal serrated structure ensure that the veneer will not crack in the width direction after drying

(3)The biomass burner can directly burn wet bark, reducing drying costs.

Contact Now

Product Details

Product Introduction of 2-Deck 36 m Wood Veneer Dryer Machine

The climate in Russia is cold and the air humidity is high. In response to these issues, we have conducted a specific analysis and increased the number of hot air fans while installing a moisture removal device at the top of the dryer. The number of hot air fans has increased from 4 meters per unit to 3 meters per unit, with a total of 3 additional hot air fans. The moisture removal device can timely remove water vapor from the dryer, minimizing the serious moisture regain rate after veneer drying.

Machine Dry Core Veneer.jpg

Product Parameters of 36 m Wood Veneer Dryer Machine

Model No	GTH30-36
Working Width	3.0m
Deck	2
Heating area length	33m
Cooling area length	3m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	Around 56 m³
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 5.5KW（11pc）
Traction motor	Power: KW，5.5frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power: 7.5KW（2pc）
6 ton biomass burner	Power: 16.5KW
Total power	108.5 KW
Actual electricity consumption	About 65kwh per hour