2-Deck 36-Meter Roller Veneer Dryer
(1)The veneer after drying has uniform moisture content which is flat without wrinkle or end waviness.
(2)Automatic electrical control system has the advantages of saving labor cost、simple operation and low failure rate whose main electrical components are international famous brand.
(3)We have perfect after-sale system which can provide 24-hour online service and remote operation is available on request.Besides,we also visit customers regularly and Provide sufficient spare parts supply in time.
Product Details
Product Introduction of 2-Deck 36-Meter Roller Veneer Dryer Machine
The 2-Deck 36-Meter Roller Veneer Dryer adopts customized services. Considering that the customer's country is relatively cold, we have changed the number of axial fans from four meters per set to three meters per set, and added three hot air fans to the main body. At the same time, this equipment is also equipped with a moisture removal system to quickly and timely discharge the moisture inside the dryer to the outside of the factory, avoiding steam pre cooling condensation caused by the temperature difference between the inside and outside of the dryer, and maintaining the dryness and pressure balance inside the dryer.
Product Parameters of 40 m Wood Veneer Dryer Machine
Model No | GTH375-36 |
Working Width | 3.75m |
Deck | 2 |
Heating area length | 33m |
Cooling area length | 3m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 70 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 5.5KW（11pc） |
Traction motor | Power: 5.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power: 11KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 115.5KW |
Actual electricity consumption | About 75kwh per hour |
Certificate
Transportation
Our Serivce
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
Send your message to us
Submitted successfully
We will contact you as soon as possible
Close