How Does a Veneer Dryer Work

The wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried board is easier to save. Let's take a look at how the dryer works.

Before the wood veneer enters the dryer, it is processed and divided into boards of the same thickness. After entering the interior of the machine, it is heated and evaporated. The construction technology of high temperature and rapid drying is adopted. The treated boards are not prone to cracks and deformation problems. Considering other issues such as temperature, humidity, time, etc., there are strict regulations for each item. Exceeding the index will affect the quality of the board.

In the process of using the dryer, you should avoid paying attention to electricity consumption, avoid circuit problems, dangers or board problems, which will affect the use. In the normal working process, there are many problems to pay attention to, especially the control of temperature and humidity, otherwise it will directly affect the quality of the board.

The first stage is to increase the temperature of the board by heating to evaporate the moisture in the wood, the moisture in the wood evaporates into the air, and then the dryer evaporates the moisture through heat; the second stage is heating, because the veneer has just been exposed to the heat generated by the machine , the temperature cannot reach the purpose of drying, so heating is needed to quickly evaporate the moisture in the wood; the third stage is to reduce the temperature. When the temperature of the wood veneer reaches a certain level, the evaporation rate of water in the veneer will decrease, because most of the water in the wood has not evaporated, and the remaining heat is enough to remove the remaining water in the wood.

During the use of the veneer dryer, failures may occur, mainly due to wear and tear, and need to be replaced with a new one; the dryer will cause the belt to loosen and break during long-term use. This problem is easy to solve and requires We check frequently and need to be replaced in time.

If the dryer catches fire during use, this is usually caused by improper operation, so you need to master the corresponding operating rules before using the dryer; the equipment will make a lot of noise after a period of use, which is normal Yes, many aspects need to be considered, such as whether the placement is correct, whether the installation process is correct, whether each part lacks oil or is seriously worn, and solve it in time.