Drying Process of Veneer Dryer

Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save. Here's how the dryer works.

Wood veneer before entering the dryer, after processing, can be divided into the same thickness of the plate, after entering machinery, heating evaporation, using high temperature rapid drying of construction technology, the plank after processing is not easy to produce cracks, deformation problem, should be considered in the process of temperature, humidity, time and other issues, all have strict rules, more than indicators will affect the quality of plate.

In the process of using the dryer, attention should be paid to electricity, to avoid circuit problems, dangers or plate problems, affecting the use of the normal working process, to pay attention to many problems, especially the control of temperature and humidity, otherwise it will directly affect the quality of the plate.

In the first stage, the temperature of the plate is raised through heating to the evaporation of water in the wood, the water in the wood evaporates into the air, and then the dryer evaporates water through heat; The second stage is heating, because the veneer has just come into contact with the heat generated by the machine, the temperature can not reach the purpose of drying, so it needs heating, in order to quickly evaporate the water in the wood; The third stage is to lower the temperature. When the temperature of wood veneer reaches a certain level, the evaporation rate of water in the veneer is reduced, because most of the water in the wood is not evaporated, and the remaining heat is enough to remove the remaining water in the wood.

Veneer dryer in the use process, there may be failure failure, mainly due to wear, need to replace a new; Dryer in the long-term use process will lead to belt loosening and fracture, this problem is easy to solve, we need to check often, need to be replaced in time.