4 layer roller veneer dryer-manufacture,factory,supplier from China

Four Layer Breathing Veneer Dryer Plywood Making Machineryveneer roller dryer is a new generation wood veneer drying machine. By adopting latest international pressure contact veneer drying technology, roller veneer dryer has the advantage of high veneer drying capacity, lowest operate cost, energy efficiency and high quality dried veneer. The veneer after drying has the uniform moisture content, flat, no waviness and shrinkage is kept to a minimum.

Product Introduction of 4-Deck 36m Wood Veneer Dryer MachineThe true test of quality comes from genuine customer feedback. This 4-tier, 36m veneer dryer is the second set of equipment purchased by our Latvian customer. While ensuring output, we have reduced the overall power consumption by more than 35%, making it more energy-efficient. At the same time, the working width has been upgraded from 3 meters to 3.5 meters, allowing it to dry two 1.5m wide veneers simultaneously.

Product Introduction of 4-Deck 38m Wood Veneer Dryer MachineWe propose solutions tailored to local conditions and customer needs.The 4-Deck 38m Roller Veneer Dryer adopts dual workstation manual loading and manul unloading system which is suitable for regions that have lower labor cost.38 meters long make it can dry about 110cubic meters in 24 hours.Product Parameters of 38 m Wood Veneer Dryer MachineModel NoGTH30-38Working Width3.0mDeck4Heating area length34mCooling area length4mVeneer thickness and size0.8-8mmVeneer water moistureFresh veneer to about 8-10%Heating materia

Product Introduction of 2-30 m Wood Veneer Dryer MachineThe 4-Deck 40m Roller Veneer Dryer is equipped with a 15 ton biomass burner, with a working width of 4.5 meters, and can dry about 190 cubic meters of veneer in 24 hours.

Wood Double Layer Veneer Dryer MachineShine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output. The moisture content after veneer drying is uniform and veneers are in good condition before gluing. The veneer dried by roller dryer is flat, no buckle or end waviness. It is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad.

Multi Layer Mesh Belt Dryer ProductMesh belt veneer Dryer is designed to handle the drying process of face veneer, back veneer and long core veneer.For process the surface veneer and long core veneer,this veneer dryer can avoid the break of the veneer,then can raise the veneer utilization ratio and production output.All outfitted air blower and screen are the high quality production,so it can increase the durability and useful life of the machine.We can design the machine upon our customer`s requirement,such as the decks and sections,but fire our customer should mention the production capacity

Product Introduction of 4-Deck 38m Wood Veneer Dryer Machine4-Deck 38m Wood Veneer Dryer  adopts 15ton biomass burner which can provide sufficient heat for drying eucalyptus veneer.The dried veneer has high flatness, uniform moisture content which can lower to 0%.The veneer dried by Shine roller Veneer dryer has gained the favor of internationally renowned furniture manufacturers due to its high quality.Product Parameters of 38 m Wood Veneer Dryer MachineModel NoGTH30-38Working Width3.0mDeck4Heating area length34mCooling area length4mVeneer thickness and size0.8-8mmVen

Double Layer Plywood Veneer Hot Press Dryer MachineShine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect.

Product advantages and featureIncreased Capacity: The multiple decks in a 4-deck roller veneer dryer allow for higher production throughput compared to dryers with fewer decks, making it suitable for larger volume production.Uniform Drying: The use of multiple decks ensures that the veneer is dried evenly and consistently across all layers, resulting in a higher quality end product with fewer defects. Overall, a 4-deck roller veneer dryer offers increased capacity, uniform drying, energy efficiency, versatility, space-saving design, and enhanced control, making it a valuable asset for woo

Product Introduction of 4-Deck Roller Veneer Dryer4-Deck Roller Veneer Dryer has the features of high productivity、energy efficiency、lowest drying cost and perfect drying effect.Firstly,the machine's working width is 4.5 meters and its length is 40 meters which contains 4 meters cold air region and 36 meters hot air region.It can dry 180 to 190 cubic meters veneer in 24 hours due to its large working width.Secondly,the machine's total power is 228.5KW and only cost around 149 killwatt hour electricity per hour.The machine is equipped with 15T Biomass Burner which can directly burn

Conveyor Single Layer Mesh Belt Hot Air DryerFor process the surface veneer and long core veneer,this veneer dryer can avoid the break of the veneer,then can raise the veneer utilization ratio and production output.All outfitted air blower and screen are the high quality production,so it can increase the durability and useful life of the machine.We can design the machine upon our customer`s requirement,such as the decks and sections,but fire our customer should mention the production capacity they want,the initial moisture and final moisture. Features Drying Slicer veneer, Stay log l

Product Introduction of 4-Deck 50m Wood Veneer Dryer Machine4-Deck 50m Roller Dryer is the one of the biggest machines we have sold abroad.It adopts 4.5meters working width which makes it can dry about 230cubic meters per day.The blower and rotating grate allow it to directly burn wet bark, allowing for local material extraction and reducing combustion costs.Product Parameters of 40 m Wood Veneer Dryer MachineModel NoGTH45-50Working Width4.5mDeck4Heating area length44mCooling area length6mVeneer thickness and size0.8-8mmVeneer water moistureFresh veneer to about 8-10%H

Product Introduction of 4-Deck 48m Wood Veneer Dryer MachineAnyone who has worked with veneers knows the challenges of drying certain wood species. Eucalyptus and pine are especially tough cases; the former has a high moisture content, while the latter tends to exude resin during the drying process. ShengHuai's veneer dryer is engineered to tackle these issues head-on. We've designed a 4-Deck, 48-meter-long dryer for our customer, complete with a 15-ton biomass burner.

Product Introduction of 4-Deck 46m Wood Veneer Dryer Machine4-Deck 46m Roller Veneer Dryer is equipped with 15T Biomass Burner which makes it can dry about 150cubic meters per day.According to customer's requirements, we adopted dual workstation  at veneer loading place which ensures drying capacity.Product Parameters of 40 m Wood Veneer Dryer MachineModel NoGTH30-46Working Width3.0mDeck4Heating area length42mCooling area length4mVeneer thickness and size0.8-8mmVeneer water moistureFresh veneer to about 8-10%Heating material & drying temperatureWaste wood,

Product Introduction of 4-Deck 36m Wood Veneer Dryer Machine4-Deck 36m Roller Veneer Dryer is the second set of Dryer bought by Latvia customer.While ensuring production capacity, the upgraded equipment fan has decreased from 11 kW to 5.5 kW, resulting in a decrease of over 35% in the overall machine.We have learned that the customer has a demand for drying 1.5 meters wide veneers, and we have proposed a personalized plan to increase the working width from 3 meters to 3.5 meters,reducing the probability of board jamming and gaining the customer's recognition.Shine Machinery alway

Roller Veneer Dryer Machine Description Shine roller veneer dryers with different models and capacity to meet different clients' requirements . we also can design according to your special requirements , normally for  2 layer plywood veneer dryer , 4meters one sectior and can be 20m -56m long .

Product Introduction of 4-Deck 46 m Wood Veneer Dryer Machine4-Deck 46m Roller Veneer Dryer adopts 4KW axial air fan which made the overall power has decreased by over 35%.It has excellent drying capacity which can dry about150 cubic meters in 24 hours.Product Parameters of 2-Deck 30m Wood Veneer Dryer MachineModel NoGTH30-46Working Width3mDeck4Heating area length42mCooling area length4mVeneer thickness and size0.8-8mmVeneer water moistureFresh veneer to about 8-10%Heating material & drying temperatureWaste wood, 140-200°C adjustable.

Product advantages and featureEnergy efficiency: The controlled environment of a 4-deck roller type veneer dryer allows for precise control over temperature and airflow, optimizing energy consumption and reducing overall operating costs compared to less efficient drying methods.Improved quality: By offering precise control over the drying process, a roller type veneer dryer helps to maintain the structural integrity and appearance of the veneer sheets, resulting in higher quality output that meets the desired specifications for various woodworking applications.Main technical and parameterParam

Multi Layer Mesh Belt Veneer Dryer MachineDrying Slicer veneer, Stay log lathe/half round slicer veneer, rotary peeling face veneer.Reliable operation, longer service life, energy efficient and unmatched performance.Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed.

Product Introduction of 4-Deck 50m Wood Veneer Dryer Machine4-Deck 50m Wood Veneer Dryer has been installed in South Africa in 2023 and is operating well now.Considering that our customers are using it in Africa, we have adopted a series of customized services.First of or,Considering the high temperatures in Africa, we will increase the cooling zone from 4 meters to 6 meters which ensures the veneer is not too hot to touch.Secondly,we widen the working width from 3m to 4.5m which make the machine dry about 230 cbm's veneer Perday.We adopt 4KW axial air fan which greatly decrease

Product Introduction of 4-Deck 48m Roller Veneer Dryer This 4-Deck 48m roller veneer dryer adopts the working width of 4.5 meters and a semi-auto Veneer Loading System, which has higher production capacity and wider application scenarios. Firstly, the 4.5 meter working width ensures that it can almost dry all widths of core boards on the market. Secondly, its 4.5 meter working width and 48 meter length ensure satisfactory drying efficiency, capable of drying approximately 230 cubic meters of veneer in 24 hours.

SHINE machinery is the first enterprise to propose the concept of  "Green Veneer Production" in China.SHINE wa established in 1999, specializing in the R&D of the complete wood veneer production machinery , form wood veneer peeling line to veneer drying line. SHINE 4 layer roller veneer dryer make sure the uniform moisture of the veneers and smooth surface.

Product Introduction of 4-Deck 38-Meter Roller Veneer DryerThe 4-layer, 38-meter veneer dryer, a cutting-edge solution that combines advanced automation with exceptional efficiency and cost-effectiveness. This state-of-the-art dryer is equipped with both an Automatic Veneer Loading and Semi-Automatic Veneer Collecting system, reducing the labor requirement to approximately 3 people.

Shine's Veneer Drying LineVeneer roller dryer is a very important machine in the plywood making process. The moisture content after veneer drying is uniform and veneers are flat with good condition before gluing. Shine biomass veneer dryer is widely valued for the lowest operation cost, high drying capacity, and energy-efficient as well as high-quality veneer output.