2-Deck 56m Wood Dryer Machine in Congo

By using 5.5KW axial flow fans, the overall power has decreased by more than 35%, greatly reducing the overall power.

Using a biomass burner and rotating grate ensures sufficient and even combustion, and wet bark can also be directly burned which greatly lower drying cost.

Contact Now

Product Details

Product Introduction of 2-Deck 56 m Wood Veneer Dryer Machine

The 2-Deck 56m Roller Veneer has been installed in Congo which can dry about 88 cbm in 24 hours.We have rich experience in the African market and have equipment in countries such as South Africa, Zimbabwe, and Congo.Shine roller veneer dryer has won the favor of African customers with lower power consumption and lower fuel costs.

Core Veneer Dryer.png

Product Parameters of 56 m Wood Veneer Dryer Machine

Model No	GTH30-56
Working Width	3.0m
Deck	4
Heating area length	52m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	Around 88 m³
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 5.5KW（13pc）
Traction motor	Power: KW，7.5frequency control（2pc）
Cold air blower	Power: 5.5KW（1pc）
Air intake fan	Power: 15KW（2pc）
6 ton biomass burner	Power: 16.5KW
Total power	138.5 KW
Actual electricity consumption	About 90kwh per hour